FreeFly’s MōVI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 pounds, rendering it compatible with mirrorless cameras all the way up to smaller digital cinema cameras. With the included batteries, the camera and essential accessories can be powered without adding any bulk to the MōVI Pro.
In conjunction with the MōVI Ring Pro handle and the MIMIC controller, it can perform in either single or dual-operator configurations.
By offering a unified design, the MōVI Ring Pro lets the camera operator grip the attached MōVI Pro from nearly any angle. Since the design also goes above and below the stabilizer itself, high and low shots are easily accomplished with minimal stretching on the part of the camera operator.
For dual-operator configurations, the MIMIC syncs with the MōVI Pro, allowing one operator to control the camera movements while a second operator moves the camera rig itself. The MIMIC has Bluetooth and 2.4GHz radios built-in for device and accessory communication.
IN THE SHOWROOM: An Introduction to the New MoVI Pro from Rule Boston Camera on Vimeo.
MōVI Pro – Digital 3-Axis Camera Stabilizer
Innovative structural design for ease of use, convenience, strength, versatility
Dual Hot Swappable 22.5v 1.8Ah Batteries with status indicators
Integrated Focus/Iris/Zoom controller
Embedded screen for tuning/customization
Increased motor torque over previous generation stabilizers
D-Tap outputs for camera and accessory power
Full stiffness and Filter autotune in approximately 10 seconds
Compatible with MōVI Pro applications for iOS and Android
Dual GPS (top and bottom) for solid signal in Sky or GroundView
Full Red RCP integration (Focus, Iris, ISO, Start stop, and more)
Internal long range 2.4GHz frequency hopping radio for connection to MIMIC
Compatible with separately available Low Profile Handle and Classic Handle
MōVI Ring Pro
30mm lightweight carbon fiber tubing
Fiber reinforced molded plastic feet
One-hand adjustable quick release monitor mount
Removable top handle
Integrated battery with 6-hour runtime
Long-range wireless operation
USB and Bluetooth connectivity
Quick release and 1/4″-20 mounting options
SD card slot
COM expansion ports
Dimensions: 7.7 x 7.8 x 6.5″ / 19.6 x 20 x 16.5 cm
Maximum Payload: 15 lb / 6.8 kg
1 x 12-14 VDC, 6A D-tap
1 x 12 VDC, 2 A D-tap
Radio Frequency 2.4 GHz frequency hopping radio
5.8 lb / 2.7 kg