Teradek Bolt Pro 600 Combo HDMI HD SDI Transmitter

Rent for $150.00 per day

SKU: R-TER-10-0960 Categories: ,


Teradek Bolt Pro 600 Combo HDMI HD SDI receivers priced separately at $75.00/Day per receiver.

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2000ft over the unlicensed 5GHz band. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.

The Bolt Pro 600 offers all of the same great features of the 300 model, in addition to an OLED screen for quick RX pairing, manual frequency selection, external antennas, and a transmission range of up to 600ft line of sight. Bolt Pro 600 comes in HDMI, 3G-SDI, and dual I/O models.
All Bolt models support real-time format conversion from TX to RX, allowing you to automatically cross convert from HDMI to 3G-SDI (or vice versa) without any extra hardware. Each model also outputs a test pattern when the video signal is lost and both the 600 and 2000 models support quick RX pairing via the OLED screen and manual frequency selection.

Watch Nick Giannino on the Benefits of the Teradek Bolt Pro Wireless Video Transmission Systems.



Video resolution: Tx – 1080p60/59.94/50/30/29.97/25/24/23.98, 1080psf30/29.97/25/24/23.98, 1080i60/59.94/50, 720p60/59.94/50, 480p59.94/576p50 (via HDMI ports only), 480i(NTSC)/576i(PAL)
Color sampling: Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later, 8-bit colors for the rest
Inputs: Tx – 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI; Rx – No
Outputs: Tx – 1 x 75 Ohm BNC(Loop-out); Rx – 1 x USB 3.0 micro B receptacle, 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI
Delay(TX to RX): <0.001sec


Format support: Tx – 48kHz 24-bit PCM, Wireless Frequency: Tx – Non-DFS Frequencies: US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz, EU & JP : 5.19 ~ 5.23 GHz, DFS Frequencies: US : 5.27 ~ 5.55 GHz and 5.67 GHz, EU & JP : 5.27 ~ 5.67 GHz
RF power: Tx – 19dbm EIRP(with two 2dbi antennas); Rx – 17dbm EIRP(with one 2dbi TX antenna)
Range: Up to 600ft line of sight
Unicast / Multicast: Unicast/Multicast for both Tx and Rx
Noise rejection: Tx – Can coexist with WiFi and 5GHz cordless phones

Input: 2-Pin Lemo 7-28 VDC for both Tx and Rx
Internal battery: No for both Tx and Rx
Consumption(1080p60): Tx – 7.8 Watts; Rx – 8.5Watts

LCD screen: Tx – No; Rx – Yes
Size: Tx – 4.3″ x 2.6″ x 1.1″(109.2 x 66.0 x 26.7mm); Rx – 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm)
Weight: Tx – 9.9oz(282g); Rx – 13.3oz(376g)
Firmware: Tx – Upgrade via Mini-USB
Operating temperature: Tx – 0 ~ 50 deg-C
Chassis material: Milled aluminum for both Tx and Rx
Mountability: Hot-shoe mount for both Tx and Rx, Multiple mounting options with 1/4″ holes for both Tx and Rx


• Bolt Transmitter
• (7) Antennas
• (2) 1/4-20 Capped Screws
• (6) Washers
• Noga Articulating Arm
• Hotshoe Adapter
• 15mm Rod Clamp
• AC Power Supply to XLR4F
• XLR4M to 2 Pin Lemo
• A/B DTap to XLR4F
• (2) A/B DTap to 2 Pin Lemo

For Multi-day Rentals: Call for Rate