Description
The HD10CEA converts SDI/HD-SDI video with embedded audio to analog video and 4 channel balanced analog audio. SD video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). HD video outputs can be configured as YPbPr or RGB. The analog audio outputs can be wired in a balanced or unbalanced configuration. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin “D” subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two loop-thru SDI/HD-SDI outputs.
Features
•Digital to Analog Audio and Video Converter
•SDI/HD-SDI with Embedded Audio Input
•SD Component or Composite Video Outputs (SD Input)
•HD Component Video Outputs (HD Input)
•4 Channel Balanced Audio Output
•2 Equalized, Loop-Thru SD/HD-SDI Outputs
•Selectable Audio Channel Pair/Group
Specifications
Inputs:
SDI/HD-SDI w/Embedded Audio, 1x BNC
Outputs:
SD Video: YPbPr – SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video)
HD Video: YPbPr, RGB
Audio: 4 Channel Balanced/Unbalanced
Video/Audio Outputs on 25 Pin D Connector
2 SDI/HD-SDI Equalized Loop-Thru, 2x BNC
User Controls:
External Dipswitch
Video Format
Pedestal
H/V Blanking
Audio Group 1 – 4
Audio Level (adjustable via switch selection):
+24, +18, +15, +12 dBu, Full Scale Digital
Size:
5.8” x 3.1” x 1” (147 x 79 x 25mm)
Power:
+5-18VDC, Regulated, 4 Watts
Requires Power Supply
