Sound Devices 302 3 Channel Audio Mixer

Rent for $40.00 per day

SKU: AUD-302 Categories: , ,


A three input, two output audio field mixer that is extremely light (less than 2lbs with batteries) and compact. The 302 was designed to be easily used anywhere in the field. Powered by three AA batteries, the 302 provides excellent sound quality and has simple-to-use controls. Set up for many different combinations of mic or line inputs or outputs plus phantom powering of mic options can be done through the set-up menus rather than with tiny dip switches. The LED metering is bright and easy to read even in sunlight and the sound quality is excellent.


• Daylight bright LED metering
• 48v/12v/T phantom powering
• Mic/line options on all inputs and outputs
• Solo channel monitoring in headphones
• Return input for monitoring


Frequency Response: 20 Hz – 30 kHz, +0.2, -0.5 dB, -1 dB @ 5 Hz and 50 kHz typical
Equivalent Input Noise:-126 dBu (-128 dBV) maximum (22 Hz – 22 kHz bandwidth, flat filter, trim control fully up)
Input Clipping Level: 0 dBu minimum (trim control fully down)
Line Output Clipping Level (1% THD):20 dBu minimum, 18 dBu minimum with 600 ohm load
Dynamic Range:115 dB minimum (trim fully down)
THD + Noise: 0.007% typical (1 kHz, +4 dBu at Line out), 0.009 max (50 Hz to 20 kHz, +18 dBu at line out, fader fully up)
Output Noise: -100 dBu (-102 dBV) maximum (22 Hz – 22 kHz bandwidth, flat filter, master gain fully up, faders fully down)
L/R Gain Matching: +/- 0.1 dB (Mic In to Line Out)
Metering: 40-segment, sunlight-viewable Selectable peak, VU, or peak (with or without peak hold) +
VU ballistics
High-Pass Filters: Switchable 80 Hz or 160 Hz, 12 dB/oct, silent activation
Mic Powering (each mic selectable): None, 12 V phantom, 48 V phantom, 12 V T-power, selected per mic input
Input Limiters: +18 dBu threshold, 20:1 limiting ratio, 1 mS attack time, 200 mS release time.
Output Limiters: Affects the outputs of the mixer. Threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting ratio, 1 mS attack time, 200 mS release time
Power supply: Internal ±16 V (bi-polar) regulated audio rails, 2.4 – 6 V range internal batteries, isolated (floating) external DC input jack, 5-18 V locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-)
Operating Temperature: -20°C to 60°C, 0 to 95% relative humidity; (non-condensing), storage: -40°C to 85°C
Weight: 0.85 kg, (1.8 lbs) unpackaged with three alkaline AA batteries
Dimensions: 47 mm x 214 mm x 114 mm (H x W x D), (1.8" x 8.4" x 4.5")

Download Manual