Description
The Teradek Bolt XT Wireless Transmitters and Receivers send visually lossless video with zero perceptible latency. The Bolt 1000 XT series transmits and receives at a distance of up to 1000 feet line of sight.
The Bolt XT lineup is compatible with all 3rd generation Bolts including the Sidekick II, 703 Bolt, and the Bolt LT line. The transmitter unit can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, or 3/8″-16 ARRI accessory mount. The receivers have a built-in NATO rail for mounting with a quick slide on and off. A 3/8-16 ARRI accessory mount is integrated into the NATO rail.
The transmitter and receiver can be powered using an integrated 2-pin Lemo connector via the included D-Tap power cable. The receivers also include male and female pass through gold mount battery plates. The plates provide a quick way to mount your receiver, power it at the same time, and maintain a small footprint.
Each transmitter supports up to four receivers. Built-in AES 128 encryption protects your video from prying eyes, while a built in spectrum analyzer and noise rejection help keep your video clean even when working around 2.4 and 5.8 GHz wireless signals.
Support for custom 3D LUTs, format conversion, time code, and start stop triggers make the whole XT line up very production friendly.
A rapid adapter is included for mounting on light stands with baby pins.
Features
• Compatibility with Bolt XT, LT, Sidekick II, and 703 Bolt
• The receiver includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to help you find a clean signal pathway.
• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
• OLED Screen with Menu Joystick Navigation.
• 1/4″-20 and M3 mounting points
• 5 included antennas for the receiver enable it to pick up signals with clarity
Specifications
Construction: Milled aluminum (chassis) and regulation-compliant PCB
Video Outputs:
SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI type A receptacle
USB: 1 x USB-type 3.0 Micro B receptacle
SDI Ancillary Data Support: Supports metadata, timecode, and start/stop flags from select camera manufacturers.
Color Sampling:
SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)
HDMI: RGB 4:4:4, 8-bit
Latency: <0.001 seconds (Tx to Rx without format conversion)
Supported Resolutions:
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576P: 50 (via HDMI only)
480p: 59.94 (via HDMI only)
576i: 50
480i: 59.94
Video Processing:
Compression
Visually lossless
Color Correction
CDL/1024 1D LUT (supports 10-bit color)
33x33x33 3D LUT (supports 10-bit color)
Audio Compression: 48 kHz, 24-bit PCM
Audio Input: Embedded
Interfaces: Switches: On/Off and Reset
Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows
USB Interface Functionality: Upgrade via mini-USB
Wireless:
Non-DFS Frequencies
UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
EU & JP: 5.19 to 5.23 GHz
DFS Frequencies
US: 5.27 to 5.55 GHz and 5.67 GHz
EU & JP: 5.27 to 5.67 GHz
RF Power: 15 dBm EIRP
Encryption: AES-128
Range: Up to 500′ / 152.4 m line of sight
Unicast Multicast: Unicast / Multicast
Noise Rejection: Can coexist with WiFi and 5 GHz cordless phones
Power Input:
2-pin connector
7 to 28 VDC
Power Consumption: Nominal 9 W (measured at 1080p60)
Operating Temperature: 32 to 104°F / 0 to 40°C
Mountable:
1 x 1/4″-20 threaded mounting hole
2 x M3 threaded mounting holes
Dimensions: 3.5 x 5.4 x 0.95″ / 8.89 x 13.72 x 2.41 cm
Weight: 13.3 oz / 377 g
Includes
• Teradek Bolt 1000 XT Receiver
• RX Antennas (5)
• AC Power Supply
• A/B DTap to 2 Pin Lemo Cable
• SmallRig Articulating Arm
• SmallRig NATO Clamp
• 3/8” to Baby Pin Rapid Adapter
