Teradek Bolt 1000 XT Wireless Transmitter

Rent for $175.00 per day



With the Teradek Bolt 1000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 1000 receiver with zero latency. The Bolt XT is compatible with existing 3rd-generation Bolt systems, such as the Bolt 1000, Sidekick II, and 703 Bolt, as well as the Bolt 1000 LT. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, two M3 threaded holes, and a built-in 3/8″-16 ARRI accessory mount. The included antennas provide a powerful signal that can travel up to 1000′ line-of-sight.

A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers, built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.


• Compatible with Bolt 1000 XT and LT, Sidekick II, and 703 Bolt

• HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter

• 5 GHz Spectrum Analyzer

• Manual channel selection

• Supports 11 channels in the 40 MHz band

• SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.

• 1/4″-20 and M3 mounting points


Construction: Milled aluminum (chassis) and regulation-compliant PCB

Video Inputs:

SDI: 1 x BNC (75 Ohm), 3G/HD/SD

HDMI: 1 x HDMI type A receptacle

Video Outputs: SDI: 1 x BNC (75 Ohm), 3G/HD/SD, loop through

Color Sampling:

SDI: YCbCr 4:2:2, 10-bit (8-bit when format conversion is enabled)

HDMI: RGB 4:4:4, 8-bit

Latency: <0.001 seconds (Tx to Rx without format conversion)

Channels: 40 MHz: 11 (USA)

Supported Resolutions:

1080p: 60/59.94/50/30/29.97/25/24/23.98

1080PsF: 30/29.97/25/24/23.98

1080i: 60/59.94/50

720p: 60/59.94/50

480i: 59.94

576i: 50

Video Processing:


Visually lossless

Color Correction

CDL/1024 1D LUT (supports 10-bit color)

33x33x33 3D LUT (supports 10-bit color)

Audio Compression: 48 kHz, 24-bit PCM

Audio Input: Embedded

Interfaces: Switches: On/Off and Reset

Desktop App: Feature-rich Bolt Manager application for Mac OS X and Windows

USB Interface Functionality: Upgrade via mini-USB


Non-DFS Frequencies

UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz

EU & JP: 5.19 to 5.23 GHz

DFS Frequencies

US: 5.27 to 5.55 GHz and 5.67 GHz

EU & JP: 5.27 to 5.67 GHz

RF Power: 17 dBm EIRP

Encryption: AES-128

Range: Up to 500′ / 152.4 m line of sight

Unicast Multicast: Unicast / Multicast

Noise Rejection: Can coexist with WiFi and 5 GHz cordless phones

Power Input:

2-pin connector

7 to 17 VDC

Power Consumption: Nominal 7.3 W (measured at 1080p60)

Operating Temperature: 32 to 104°F / 0 to 40°C


1 x 1/4″-20 threaded mounting hole

2 x M3 threaded mounting holes

Dimensions: 0.95 x 2.6 x 4.47″ / 2.41 x 6.6 x 11.35 cm

Weight: 8 oz / 226 g


Teradek Bolt 1000 XT Transmitter

(2) Tall TX Antennas

AC Power Supply

A/B DTap to 2 Pin Lemo Cable

Noga Articulating Arm

3/8” to Baby Pin Rapid Adapter

For Multi-day Rentals: Call for Rate