Teradek Bolt Pro 2000 HD-SDI / HDMI Transmitter

Rent for $225.00 per day

SKU: R-TER-10-0990 Categories: ,


Teradek Bolt Pro 2000 HD SDI HDMI receivers priced separately at $125.00/Day per receiver.

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000’ over the unlicensed 5GHz band. The Bolt line-up comes in 3 ranges: 300, 600, and 2,000ft. The Bolt 2000 has external antennas and an OLED screen for settings selection. It is multicast capable up to 4 receivers, supports timecode and metadata pass through, and includes the USB 3.0 GRAB Engine.

All Bolt receivers now have integrated 3D LUTs that output custom graded video, which is ideal for directors and producers who want to monitor footage with a color palette that’s closer to final grade rather than a flat RAW image. Custom LUTs can be loaded via the Bolt Manager and selected on individual Bolt Receiver OLED screens.

For added convenience, all Bolt models support real-time cross conversion from TX to RX, letting you automatically cross convert from HDMI to 3G-SDI, or vice versa, without any extra hardware. All Bolts include real-time standards conversion of resolution and/or frame rate control directly on-board the receiver OLED.

Watch Nick Giannino on the Benefits of the Teradek Bolt Pro Wireless Video Transmission Systems.




• Wireless HD video with zero delay (<1ms)
• Up to 2000’ range
• Looping HD-SDI output, transmits to up to 4 receivers
• Transmitter accepts either HD-SDI or HDMI as input
• Receiver outputs both HD-SDI and HDMI
• Receiver has USB 3.0 video and audio output
• Receiver features OLED and joysticks for easy setup and pairing
• Transceiver pairs ship in sturdy protective case


Video resolution: 1080p60/59.94/50/30/29.97/25/24/23.98, 1080psf30/29.97/25/24/23.98, 1080i60/59.94/50, 720p60/59.94/50, 480p59.94/576p50 (via HDMI ports only), 480i(NTSC)/576i(PAL)
Color sampling: Depends on the input/output types and RX settings; SDI 10-bit with no format conversion and FPGA v.1.1.0 or later; 8-bit color for the rest
Inputs: Tx – 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI; Rx – No
Outputs: Tx – 1 x 75 Ohm BNC(Loop-out); Rx – 1 x USB 3.0 micro B receptacle, 1 x 75 Ohm BNC, 1 x Type A receptacle HDMI
Delay (TX to RX): <0.001sec
Format support: 48kHz 24-bit PCM
Frequency: Non-DFS Frequencies: US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz; EU & JP : 5.19 ~ 5.23 GHz; DFS Frequencies: US : 5.27 ~ 5.55 GHz and 5.67 GHz; EU & JP : 5.27 ~ 5.67 GHz
RF power: 22dbm EIRP(with two 5dbi TX antennas), 17dbm EIRP(with one 2dbi TX antenna)
Range: Up to 2000fts line of sight
Unicast / Multicast for both Tx and Rx
Encryption: AES-128
Noise rejection: Can coexist with WiFi and 5GHz cordless phones
Input: 2-Pin Lemo 7-28 VDC for both Tx and Rx
Internal battery: No for both Tx and Rx
Consumption(1080p60): Tx – 7.7 Watts, Rx – 8.0 Watts
LCD screen: Tx – No, Rx – Yes
Size: Tx – 4.3” x 2.6” x 1.0”(109.2 x 66.0 x 26.8 mm), Rx – 5.8” x 3.5” x 1.0”(147.3 x 88.5 x 25 mm)
Weight : Tx – 9.5 oz(270g), Rx – 13.8oz(390g)
Firmware: Upgrade via Mini-USB
Operating temperature: 32 ~ 122 deg-F
Chassis material: Milled aluminum
Mountability:Hot-shoe mount for both Tx and Rx, Multiple mounting options with 1/4″ holes for both Tx and Rx


Bolt Transmitter
(2) Large Antenna
(5) Small Antenna
(2) 1/4-20 Capped Screws
(6) Washers
Noga Articulating Arm
Hotshoe Adapter
15mm Rod Clamp
1/4 – 20 Rapid Adapter
AC Power Supply to XLR4F
XLR4M to 2 Pin Lemo
A/B DTap to XLR4F
(2) A/B DTap to 2 Pin Lemo