Description
Teradek Bolt Pro 3000 HD SDI HDMI receivers priced separately at $175.00/Day per receiver.
With highly refined software, new wireless radios, and a redesigned chassis, the Bolt Pro 3000 3G-SDI/HDMI Transmitter from Teradek is a reliable and capable monitoring solution. This transmitter includes metadata and timecode support, 3D LUTs, USB 3.0 GRAB Engine, dual inputs/outputs, is multicast capable, and offers manual frequency selection. The transmitter can pair with and multi-cast to up to four receivers at a distance of 3000′. Receivers available separately for rental.
Watch Nick Giannino on the Benefits of the Teradek Bolt Pro Wireless Video Transmission Systems.
Specifications
Video Input: 1 x BNC, 75 Ohms 1 x HDMI Type A
Video Output: 1 x BNC, 75 Ohms (loop-through out)
Video Delay: Transmitter to Receiver: < 0.001 sec (when no video format conversion is enabled)
Color Sampling: YCbCr = 4:2:2, 8-bit for SDI (10-bit, without format conversion and FPGA v1.1.0 or later) RGB 4:4:4 (HDMI out, 8-bit color)
Supported Resolutions:
1080p 60/59.94/50/30/29.97/25/24/23.98
1080PsF 30/29.97/25/24/23.98
1080i 60/59.94/50
720p 60/59.94/50
576p 50 (via HDMI ports only)
480p 59.94 (via HDMI ports only)
480i (NTSC) / 576i (PAL)
Wireless:
Up to 3000′ (914.4 m) line of sight
Non-DFS Frequencies:
5.19 to 5.23 GHz and 5.755 to 5.795 GHz
DFS Frequencies:
5.27 to 5.55 GHz and 5.67 GHz
RF Power: 22 dBm EIRP (with two 5 dBi transmitter antennas)
Noise Rejection: Can coexist with Wi-Fi and 5 GHz cordless phones
Audio Format Support: 48 kHz, 24-bit PCM
Material: Milled aluminum
Mounting: Multiple mounting options with 4-40 holes
Multiple mounting options with 1/4″-20 hole
Power: 2-Pin LEMO 7 to 28 VDC, No internal battery, Consumption: 7.5 W
Dimensions: 0.9 x 2.6 x 4.5″ (2.3 x 6.6 x 11.4 cm), Case: 12 x 9.0 x 4.5″ (30.5 x 22.9 x 11.4 cm)
Weight: 8 oz (226 g)
Includes
Bolt Transmitter
(2) Large Antenna
(5) Small Antenna
(2) 1/4-20 Capped Screws
(6) Washers
Noga Articulating Arm
Hotshoe Adapter
15mm Rod Clamp
1/4 – 20 Rapid Adapter
AC Power Supply to XLR4F
XLR4M to 2 Pin Lemo
A/B DTap to XLR4F
(2) A/B DTap to 2 Pin Lemo
