The Swit BIVO-160 is a 160Wh B-Mount battery that supplies either 14.4V or 28.8V from a single pack. It reads the ID pin on the camera’s B-Mount plate and sets its output to match, so one pack can run a 24V camera like the ARRI ALEXA 35 and then move to a 14V monitor or light without any switching. It handles a constant 200W load and gives roughly two hours of runtime on an ALEXA 35.

Two D-Tap ports power accessories in either mode. They put out 10.8 to 16.8V at up to 200W in 14.4V mode, and a regulated 16V at up to 50W in 28.8V mode. A front OLED screen shows the output voltage, percentage, remaining runtime, and any protection codes. The pack charges at 100W in about 160 minutes, survives a 3.9-foot drop, and has a built-in flashlight for loading in the dark.

• 160Wh Capacity
• Dual Voltage: 14.4V and 28.8V B-Mount Output
• Automatic Voltage Selection via B-Mount ID Pin
• 200W Constant Load
• 2x D-Tap Outputs in Both Voltage Modes
• OLED Display: Voltage, Percentage, Runtime, Warnings
• 100W Fast Charging, Approx. 160 Minutes
• 3.9′ / 1.2 m Drop Resistance
• Built-In LED Flashlight

• Battery Mount: B-Mount
• Capacity: 160Wh
• Chemistry: Lithium-Ion
• B-Mount Output (28.8V Mode): 21.6 to 33.6 VDC
• B-Mount Output (14.4V Mode): 10.8 to 16.8 VDC
• Voltage Selection: Automatic, via B-Mount Plate ID Pin Resistor
• Max Load: 200W Constant
• D-Tap Outputs: 2x; 10.8 to 16.8V, 200W Load (14.4V Mode); 16V Regulated, 50W Load (28.8V Mode)
• Display: OLED (Output Voltage, Power %, Remaining Runtime, Protection Codes)
• Charging: 33.6V, 100W Fast Charge, Approx. 160 Min
• Compatible Charger: Swit PC-P461B 4-Channel B-Mount Charger (4 Packs in Approx. 2 Hours 40 Min)
• Drop Resistance: 3.9′ / 1.2 m
• Charging Temperature: 32 to 104°F / 0 to 40°C
• Discharging Temperature: -4 to 122°F / -20 to 50°C (Reduced Capacity and Max Load Below 32°F / 0°C)
• Dimensions: 5.7 x 3.9 x 2.1″ / 144 x 100 x 54 mm
• Weight: 2.5 lb / 1.15 kg