The Aladdin Fabric-Lite 350W is our newest LED 3×3 panel that can be folded and flexed. I’ve found that the best part about this light is its flexibility — because it’s made of fabric, it can easily be folded and packed into a backpack. This makes it easy to take pretty much anywhere.
The Fabric-Lite can be mounted onto its frame with a diffuser and grid, or you can simply hang it wherever you need it. There are literally NO restrictions for where this light can go…
I took the Fabric-Lite on a recent shoot to NYC, and it was the perfect choice. I folded and packed it away in my camera bag for traveling, and when it came time to use it, I tied it up high around a pillar to use as a fill light.
Another fantastic feature about this light is that you are not restricted to AC power. It comes equipped with two gold mount plates for your battery power needs, which makes it easy to use. The light has a color temperature range of 2900 to 6200k with a CRI of 97.
Interested in renting the Aladdin Fabric-Lite 350W? Contact Rentals by email or phone at 800-rule-com.
–Alex Lopez, Quality Control Technician
This is literally the most flexible light in the world of entertainment lighting! The Bi-Color Flexlite, released in April of this year by Aladdin USA, is a light everyone should be using on every shoot. When I say “literally” I mean the fixture can actually bend to fit the contour of a column or the ceiling of a car. The Bi-Color Flexlite is so light and malleable that you can tape it to a column or to the ceiling of a car without any other type of support. Crazy, right? But “literally” true. Need the light to be daylight balanced to boost the ambient daylight from the windshield of a car? No problem. Switching color temperature is a breeze with the turn of a dial! Use gaffers tape to tape the unit to the ceiling of a car or the inside of a windshield. And don’t worry about power availability — you can run it off a battery. As an LED, it will run for an hour on a 90wh battery or 2 hours on a 180Wh battery. The “flexibility” doesn’t stop there…the accessories available for this fixture can support any situation. Do you need a lightweight lantern in a limited power situation? Just strap on gold mounted batteries and set it up with the custom-built lantern. The lantern just pops open into shape when you remove it from the bag -– it can be set up in a matter of seconds. Don’t have a c-stand or maffer clamp? Hang the Bi-Color Flexlite in its lantern anywhere. The kit comes with a dual magnet mount so it can be mounted onto any metal surface. The kit is full of useful accessories in addition to the dual magnet mount. Included is a baby pin adapter to set it up directly on a stand. Additionally, there is a soft box with no support rods or speed rings – the soft box just affixes via Velcro directly to the back of the light. The front diffusion piece sits approximately 4″ above the Bi-Color Flexlite panel. This creates a beautiful, soft light. Have you been concerned about the green shift in LED lighting? Well, not any more! This light reads like a dream on the CRI with even, white light – no valleys and no peaks. Check out this photometrics chart from the Aladdin website:
|Aladin Bi Flex 50W
But wait, there’s more… I just can’t say enough great things about this fixture. The Bi-Color Flexlite is splash and rainproof too – they have conducted tests submerging the fixture in pools and an aquarium. BUT, do be careful, as the dimmer and power unit are not splash/rainproof and will need to be protected. This light can be used in so many different ways that I wouldn’t want to be on set without at least one of these. Thank you for reading, and, as always, do not hesitate to call me with any questions at 617-277-2200 (or 800-rule-com), or email me HighOutput@rule.com. I look forward to seeing all of you at my next Showroom Demo on Wednesday, September 30th from 12 to 1pm. RSVP: HighOutputEvents@Rule.com. -Alison Cupples, Lighting Specialist, HighOutput@Rule.com